Welcome to the RASS® Family!
Congratulations on the purchase of your new RASS® equipment!
We are thrilled to partner with you in achieving the highest standards of radar analysis and performance. To ensure you get the most out of your new system, we’ve put together this quick-start guide to help you get up and running smoothly.
Step 1: Set Up Your Workstation
How you begin depends on whether you purchased a workstation directly from Intersoft Electronics or are using your own hardware.
Option A
You purchased a RASS® Workstation from Intersoft Electronics
Your workstation is plug-and-play. The software, licenses, and calibration files are pre-installed.
Login: When prompted for a password, enter radar.
Note: For security purposes, we strongly recommend changing this password after your first login
Warranty & Support: Your DELL workstation includes a support service contract. To activate this, please register the transfer of ownership to your company here.
Option B
You are using your own Workstation
Locate the USB stick provided with your RASS® device. Follow these three steps:
- Install Software: Run the RASS® installer (see the RASS® installation instructions file for details).
- License Setup: Follow the RASS® Software License Installation Procedure to move license files to the correct directory.
- Calibration Files: Run the calibration file installer.
Tip: Restart your device after installation before performing your first measurement.
IT Restrictions? In case your IT department does not allow you to use a USB stick, you can download the software and calibration installer from our ftp server. Please don’t hesitate to contact us for ftp credentials or to receive your license files via ftp or email.
Licensing & USB Dongle
The RASS® software requires a physical connection to verify your license.
- Always plug in your USB dongle before launching the RASS software.
- If the dongle is not detected, the software will display an “Unlicensed” message.
Maintenance and Calibration
To maintain the precision of your measurements, we advise having your equipment calibrated annually, starting from the date of first use.
To request a calibration quote or schedule a calibration under a maintenance contract, please don’t hesitate to contact us.
User Manuals: Can be found directly within the RASS® software. Go to the “Help” menu at the top of the RASS® toolbox.
Technical Assistance: If you have any questions during setup, our team is ready to help.
